These rubber adhesives are used in the footwear and haberdashery industry, for auxiliary gluing of natural and artificial leather and rubber, fabrics, cardboard and other materials.
USE: Before gluing, it is advisable to clean and sand the surfaces with sandpaper. Apply a thin layer evenly to the surfaces to be glued and allow to dry for about 20 minutes. Highly absorbent surfaces are recommended to be lubricated twice, each time allowing to dry after approximately 20 minutes. After the last layer, both surfaces are connected and pressed well for about half a minute. The glue finally dries after 48 hours.
The glue has flammable components, so it should be used only in well-ventilated rooms, away from sources of fire. Store the glue in closed containers at a temperature of +5 to +25°C
